Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Body Molding Removal

posted by  Steve on  Wed Feb 19 10:11 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:16 CST 2014
[RELATED]

The emblems are adhered using adhesive tape and can be gently heated with a hot air gun to loosen them. Peel them off with a spatula. The door moldings are adhered using clips in holes: pry off the outer cover using your hands or a spatula (protecting the paint with tape), then remove the inner retainer and clips from the holes. You may need new clips to reinstall, and make sure the paint underneath and at the holes is intact to keep it from rusting.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Body Molding Removal
posted by  someone claiming to be Jeff W.  on Wed Feb 19 06:52 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.