Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Lower control arm bushing replace cost 700 1990

posted by  jchiodi on  Sat Mar 1 14:56 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Feb 25 11:26 CST 2013
[RELATED]

If you are talking about the radius arm bushing.. then it's not too bad. These are the bushings that are on the arm that goes from body to control arm.

I've done an 85 and a 90 740. One set from IDP for about 65.00. and a set from fcpgroton for about 15.00. both were polypropylene. Both seemed about the same.

Not too hard a job. Just make sure you loosen up with PB Blaster!
jc
--
1985 740gle na, 1990 740gle 16 valve






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Lower control arm bushing replace cost [700][1990]
posted by  m rad  on Sat Mar 1 05:21 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.