Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

speed sensor wiring 700 1987

posted by  Lawrence on  Sun Mar 23 11:44 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

According to my diagram, the brown wire that goes to Pin #2 of the 3pin connector is a ground wire. And I believe it grounds the 12v coming from the ignition.

The brown wire at # 6 of the 12pin connector grounds the speedo sensor/fuel guage. Thats what it looks like to me.

I would think that if you're using the original speedo You do:
Blue/red to 3/3(from sensor)
brown---to 3/2(ground)
Gr/wh---to 3/1

Then take the brown wire from the converter to # 6 of the 12pin connector. I believe # 6 is just a ground. splice it in there somehow.



Hope this helps

Lawrence






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New speed sensor wiring [700][1987]
posted by  daylan  on Sun Mar 23 07:15 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.