Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2010 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

looking for conversion suggestions 700 1990

posted by  garlandw on  Wed May 7 14:31 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 10 08:58 CST 2014
[RELATED]

Nope, the 16 valve oil pump is not in the pan. Looking at the engine from the front, the balance shafts are at the lower left and the upper middle right. They are externally mounted. The oil pump is behind the bigger gear at the lower right and is driven by the timing belt. It is accessible by removing the gear. The pump is in the sump for the B230F and you fave to lift the engine and remove the pan to get at it. The 16 valve oil pump has a larger capacity than the 8 valve engine since extra flow is needed for the balalnce shafts, the extra cam and the hydraulic lifters.

Bill
--
Volvo Info Site 1990 745GLE 16valve






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New looking for conversion suggestions [700][1990]
posted by  mwhittie subscriber  on Wed May 7 06:12 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.