Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

????????

posted by  david hunter on  Wed May 14 12:31 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 30 22:10 CST 2014
[RELATED]

Not sure what the point of your post is???? All you need is an outside diameter slightly smaller than the size of the seal. There are only 2 sizes involved, one for the crank and a smaller one for the other 2.

Different plastic pipe makers produce pipes and fitting whose outside diameters may be different from each other. Yes the "busness" part of the fitting will be standard but other dimensions would vary. For example a female fitting from 2 different sources could have different OD dimensions. Finding the correct piece is simply a trip to Home Depot with seal in hand.

BTW do not whack the seal, just gentle taps till it is flush with the surface. Try to keep it straight.
--
David Hunter






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Q: 'What PVC fittings can I get to work on B230F front seals?' Here's my list:
posted by  B.C. subscriber  on Mon May 12 04:59 CST 2003 >
  • New ????????
    posted by  david hunter  on Wed May 14 12:31 CST 2003 >
    • New ????????
      posted by  B.C. subscriber  on Wed May 14 17:10 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.