Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Testing Cold Start Valve 200 1979

posted by  someone claiming to be A. Baker on  Fri May 16 16:31 CST 2003 [RELATED]

I just went through about two days of agony trying to fif my cold start problem.what I found was there was a terminal on the CSI that was spred too far and not making contact.I also found that that the signel comes from the ignition to CSI temp sensor to injector. And with the hayes book it is some what vaigue on the diag.If you go to volvotechinfo.com you can order the factory repair manuals all 50 of them including the TSB's and updates. The injection circut is simple and if you have a relay on the R/front fender that has a harness pluged in.chase it down. if it goes no where or is go all together then you have a 1979 fuel system if it is conected then you have a 1980 system






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Testing Cold Start Valve [200][1979]
posted by  JenaBob  on Fri May 16 09:46 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.