Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2006 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel injection 1800 1973

posted by  Phil S. on  Mon May 26 13:30 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

Check resistance from the ECU connector pin #3 to ground. This should be in the ballpark of 20-25 ohms or so. Compare the reading with pins 4, 5 and 6 (the other injector signals). If one is significantly different, and if you know it's not the injector because you swapped it around, there is a problem with the harness.

If there is a descrepancy, check for corrosion or breakage where the wires solder to the big connector; the cover does come off. Of course, this checks the ground side of the injector as well, but you say you've already ohmed that one out.

If there is no discrepancy, it really is likely to be the ECU. Note that the '72-'73 ECU is different from the earlier one.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fuel injection [1800][1973]
posted by  potsy  on Mon May 26 04:18 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.