Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

back-firing & missing when cold 200 1986

posted by  someone claiming to be Niel on  Wed Jun 18 11:03 CST 2003 [RELATED]

If it is mechanical fuel injection (K-Jetronics, no wires to injectors), check the coolant switch and the cold start injector. There are 2 coolant sensors, one is a true sensor for the instrument cluster, the other is just a thermal switch that close when the engine is cold, connecting power to the cold start injector. The cold start injector is an electrical injector, not a mechanical one as the others, and I think they are more sensitive to contamination (not sure on this one).

If it is electronic fuel injection, check the sensor. Electronic injection used to use 2 sensors, one for the instruments and the other for the ECU, but both will be true sensors and not switches.

Not an expert on cars, but I've been in electronics for 18 years: a hobby turned into a profession.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New back-firing & missing when cold [200][1987]
posted by  davedj  on Wed Jun 18 04:14 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.