Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

NO START/CODE 1-3-1 900 1992

posted by  jev on  Sat Dec 6 07:17 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

GREETINGS...THIS 960 HAS NO INJECTOR PULSE/NO IGNITION PULSE. HAS CODE 1-3-1 FOR NO RPM SIGNAL. HAVE SCOPED RPM SIGNAL AT CRANK SENSOR AND AT ECM AND IT IS PRESENT AND PROPER. OHMS TESETED CRANK SENSOR - OK AT 320 OHMS. TESTED BOTH WIRES FROM CKP SENSOR TO ECM FOR CONTINUITY AND THEY ARE BOTH GOOD. TRIED A KNOWN GOOD ECM AND NO CHANGE. ALSO TESTED BOTH IGNITION AND FUEL RELAYS AT LEFT STRUT TOWER AND THEY WORK PERFECTLY. CAM SENSOR WORKS AS IT SHOULD. HAVE FUEL DELIVERY FROM PUMP TO FUEL RAIL WITH KEY ON AND CRANKING. ALL FUSES CHECKED AND OK. REPLACED MAIN GROUND CABLE FOR THE &%^# OF IT, NO CHANGE.........WHAT GIVES?? ANY IDEAS???
THANKS...JEV






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New NO START/CODE 1-3-1 [900][1992]
posted by  jev  on Sat Dec 6 07:17 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.