Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

the in-line pump, or did you mean the in-tank pump? 200 1988

posted by  Ken C on  Fri Dec 19 10:39 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:39 CST 2014
[RELATED]

Hi. There are two pumps, both "in line" of course. One, the main fuel pump, is just ahead of the fuel tank (think, between the B and C pillars, nearer the C pillar), and more on the driver's side of the driveshaft.

The other is the in-tank pump, a.k.a., prepump. This is inside the fuel tank, hanging on the support for the fuel level sensor. You have to open the fuel tank to get to it -- remove the rear folding seat, and on the floor of the car, you'll see a metal plate. Unscrew the fasteners and you'll look down on the top of the fuel tank, at the "collar" that holds the hardward in place. Remove the collar (a whole other story), and you can pull out the hardware and see the pre-pump.
Good luck, and Happy Holidays.
Ken





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Where's the In-Line Fuel Pump [200][1988]
posted by  someone claiming to be Michael  on Thu Dec 18 21:53 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.