Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rough Start when Cold 200 1989

posted by  t-bone on  Mon Mar 29 02:13 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 21 04:24 CST 2010
[RELATED]

Joe,

Look for vacuum or intake leaks. The plastic accordian intake hose can rub against the inner fender wall and the high ridges can wear open. This is the intake section between the AMM and Throttle Body. Sometimes the splits are hard to see unless you remove the intake hose for a careful examination. Also make sure all vacuum connections are not split, cracked or disconnected. Hope this is of some help.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rough Start when Cold [200][1989]
posted by  Big Joe  on Mon Mar 29 00:37 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.