Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Keyless entry wiring question 700 1987

uid 5008's pic
posted by  Colin UK on  Fri Apr 16 08:09 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Dave,
I did this a while ago and fitted the receiver close to the steering column above the drivers knee pad.
The power was taken from the supply side of the brake light switch and the ground attached to a convenient bolt.

The new lock motor is wired in parallel with the rear door motor.

Also, if you use the wires that go to the existing key switch to drive the new lock motor you don`t have to fight 2 new wires through the flexible conduit between the door and body.

If you need any more details let me know.

Colin.

1990 740SE B200E/M47, remote C/Locking.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Keyless entry wiring question [700][1987]
posted by  someone claiming to be BigDave  on Fri Apr 16 07:29 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.