|
I would go to fcpgroton.com. They have nice quality german rotors for around 30-40 each. You will also want pads, they have a good assortment. Figure about 50 a wheel should do it. You might want to bleed the fluid as well. I think that is next on my list. Overall the job is pretty easy to do, should take you maybe 3-4 hours to do all four wheels. Make sure you torque the wheels to 63 ft lbs when you are done. While you are at it, you can order filters, etc. from them as well. Most folks (including me) go with the Mann filters. Good Luck.
--
97 S90 with 179K miles still going strong
|