Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wipers - Intermittent Setting Doesn't Work 200 1993

uid 22065's pic
posted by  Grif on  Fri Jan 7 11:00 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 13 19:50 CST 2013
[RELATED]



I guess I need to reseal my front windshield as well.

I just dug the wiper relay out this morning. It is behind the carpet where the driver rests his left foot. When you pull off the felt bib that is buttoned underneath the dash you will see a nest of wires going down into the carpet where your left foot rests. If you gently pull up on those wires you will end up pulling out the wiper relay and maybe the rear wiper relay as well. My front wiper relay case was made out of black plastic, but my car is a 1986 so yours could be a different color if they changed stuff.

Mine was full of water and corroded. I popped the outer casing to the relay off and poured out the water. Then I went to work cleaning the circuit board, resisters, contacts, transistors, and tranformer on the board with Q-tips and rubbing alcohol. Let the alcohol dry, put the casing back on, and plugged it back it. Wipers then worked like a charm.

Good Luck


--
- Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wipers - Intermittent Setting Doesn't Work [200][1993]
posted by  Oleseahorse subscriber  on Fri Jan 7 08:58 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.