Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2014 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Confused about engine code checkup 900

uid 6573's pic
posted by  javalion on  Sun Feb 6 10:07 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 23 09:57 CST 2014
[RELATED]

Fuel injection ----- Regina or LH Jetronic 2.4--Read from Socket 6
Ignition system --- Rex or EZ 116K--------------Read from Socket 2

Most Codes are shared by both systems and Table 3 should probably say “Regina and LH Jetronic Fuel Injection Fault Codes. Read from socket 2.” There are some discrepancies like Code 1-2-1, faulty air mass sensor signal in the LH or a MAP pressure sensor signal fault in the Regina. 2-2-2 is Regina only. I think there may be others.

If you pulled code 2-4-1 from socket 6, it an issue with the EGR system which would send a signal to the check engine light. I would check the hoses, clear the code and wait for the code to repeat itself. There is cleaning information in the FAQ for the EGR but the thing is so hard to get to and remove.
--
Tom F. Couple of Volvos Mods, RainX & cup holders.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Confused about engine code checkup [900]
posted by  masupra  on Sun Feb 6 06:37 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.