Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2019 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Speedo Capacitor Replacement Help Needed 700

>>Hi,
Was your speedo the Yazaki or VDO and what year model?

Mine is an -88 VDO. ABS equipped (shared sensor for rear ABS and speedo)

>>Mine is Yazaki. Each digit in the odometer has its own window. I believe the VDO has one odometer window.

Yes, mine has only one window for the odo and trip, respectively.

>>Replacing the speedo needle concerns me. I would imagine correct replacement is critical.

Don't be overly concerned, just pull while turning the needle counter clockwise. But of course, don't use too much force such that you break the needle. Pe patient, and it will eventually come loose!
Upon replacement push and rotate the needle until the needle rests at 20 km/h as it did from the beginning.

>>You make reference to the 'number plate' and the need to peel it off. It appears to be a thin vinyl like material that would easily stretch and mishapen. Is this the case?

'Number plate' may not be the best word. I'm not a native English speaker!
Having said that, it is actually quite thick and to my surprise It could be bent quite a lot without stretching the material. I tried to peel it off without bending it more than 45 degrees.

Your help is appreciated, thankyou.

John H from Downunder






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Speedo Capacitor Replacement Help Needed [700]
posted by  Hibbo  on Thu Mar 24 13:59 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.