Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Slightly off-topic 200 1984

uid 18083's pic
posted by  lucid on  Tue Aug 23 05:39 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

Rhys,

Did you know that the older Fiat twin cams (from the '70s at least) use the same shims as the Volvo?

A friend gave me a complete Fiat dealer set years ago (I had a '75 Fiat 131). They must tend to be thicker, as over time most of my "Volvo sizes" got used up, even with swapping them about. Still have plenty over 4,0mm though. And a bunch of used thinner ones that are still good.

Bruce

P.S.
Those NOS carbs I mentioned long ago turned out to be mainly some badly corroded bowls, pistons, and a few other bits. Nothing exciting after all.
--
Bruce Young
'93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New valves need adjustment, best approach? [200][1984]
posted by  88 760GLE  on Mon Aug 22 22:23 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.