Volvo V8 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2013

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C Electrical question.

posted by  bob45228 on  Tue Aug 2 15:02 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have an 88 740 GLE with the 93 T-bird HO 5.0 and running an 89 5.0 harness and 91 ECU. T-bird engine is basically the 94-95 mustang engine and accessories. I have just begun the electrical connection of the A/C. When I put 12V to the grey blade -connector on the end of the driver side harness both sides of the A/C connector r ead 12V is this correct for the 87-93 harness? The compressor for my engine requires the connector to have on side of the connector to be 12V and one to be grounded. Is this just a difference in requirements of the compressors? Do the old compressors use the compressor ground with only 12v to the connector?
Thanks,
Bob






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C Electrical question.
posted by  bob45228  on Tue Aug 2 15:02 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.