Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2010 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Idle control valve and front motor mount? 850

posted by  KlausC on  Sun Nov 18 04:09 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

A rough idle is usually associated with a leaky vacuum line. Most diffficult to find, given there are so many of them. Also may be caused by a leaky injector seal or intake manifold gasket - try a spray bottle with water and see if the idle changes while spraying.
Also, if the plug wires are not new, take the cover plate off and wiggle the wires, one by one, and see if any are grounding on the wall of the engine.

Klaus
--
The 164 has a new home, all I am left with are a 95 854T and a 98 V70R :)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Idle control valve and front motor mount? [850]
posted by  becktg  on Sat Nov 17 19:53 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.