Volvo AWD S40-V40 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2007 S40-V40 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fault Codes won`t go!! S40-V40

Thanks KlausC.....i have fitted a new FPR and what a difference also some Berk of a mechanic had left off an "O" ring on No.1 injector where it goes into the manifold...he had used string or something so a bad air leak didn`t do it any good.....Good idea about the service light....although a new No. 1 o2 sensor for the front pipe the Lambda light is still on after resetting still happens 10 sec after startup......do you know where the No.2 o2 sensor wire connects to which is the sensor behind the cat?....lying under the car looking at it ..it disapears into a rubber grommet and must go along the tunnel inside the car by the console .....it does NOT as Vadis says connect up at the firewall where the No.1 sensor connects too......Any ideas before i rip up all the carpets at the console?........






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fault Codes won`t go!! [S40-V40]
posted by  960kg  on Sat Apr 18 06:14 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.