Volvo AWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2006

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replacing CV boots on an 850 GLT

posted by  someone claiming to be Dan Simoes on  Sun Nov 18 03:47 CST 2001 [RELATED]

I'm in the middle of this. It took a few tries and trips to Sears to figure out that the big axle nut is a 36mm. I'm past that now.

I have the whole thing apart and loose (swaybar links off, which need to be replaced anyway; strut separated from axle; control arm out, also replacing).

But... I'm curious how you get the axle out of the tranny. Obviously a puller of some kind is required. The local shop said a couple of screwdrivers would do it, but I don't think there is enough clearance.

Posts here or an email to dans@audifans.com would be most welcome.

I'll try to snap some digital photos of the job.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New replacing CV boots on an 850 GLT
posted by  someone claiming to be Dan Simoes  on Sun Nov 18 03:47 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.