Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2008 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Re: Shift lock solenoid 850 1994 Turbo

posted by  someone claiming to be LM on  Fri Dec 29 03:29 CST 2000 [RELATED]

Oops, I forgot. You do not have to pull the knee bolster to access the switch. You just have to remove the bottom panel (3 Torx screw to removed).

Also, if you see +13V on both side of the solenoid when the brake pedal is pressed and the shift lever is in park position, this is wrong. One side should be ground and the other side should be +13V. This looks exactly like my problem. If I remember correctly, the ground is provided thru the brake pedal switch. I will confirm tonight.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Shift lock solenoid [850][1994 Turbo]
posted by  someone claiming to be Prospero  on Fri Dec 29 00:45 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.