Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Knock/clunk in rear suspension remains after replacing about everything! 200

posted by  yama on  Tue Nov 8 00:04 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

In most of the points the suspension bolts fit loose in the crush tubes. Its the proper torquing of the bolts that "locks" the crush tube to the chasis or suspension component. Some of the values are quite high. The upper shock mount bolt is torqued from the inside of the frame rail and could be loose. I'd round up all the torque values and take them to your installer to be checked.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Knock/clunk in rear suspension remains after replacing about everything! [200]
posted by  someone claiming to be Dennis  on Mon Nov 7 15:11 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.