Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2009 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ANSWER SU question 120-130

posted by  Rhys on  Mon May 7 13:47 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Nov 20 10:22 CST 2012
[RELATED]

The red plastic jets I have seen are all for horizontal applications and are .090 orifice. The black ones in the HS6 are .100 orifice.
It sounds like you are running a bit lean, or the float levels are high and sloshing is causing the weak idle after stopping.
If it's rich, it will smell rich.
Check the float levels, and if they are good run the mixture nuts down three flats and drive it. You'll know quick enough if you are on the right track. It's probably an adjustment that will cure it all.
Rhys

This post has been marked as an answer to the original question.

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED SU question [120-130]
posted by  chasmataz  on Mon May 7 11:08 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.