Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2011 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Varies somewhat 120-130

posted by  jparker3 on  Wed Jul 30 13:20 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 9 18:47 CST 2009
[RELATED]

I thought .005 - .015 was about right, with most right at .014 - .015, until I came across some theoretically stock engines that measured out at around .030.
Before that we just routinely took .007 off the block during rebuilds and used the .028 gasket which is no longer available. So you really have to measure it, to be sure. Shoot for a squish area distance of around .035 plus or minus a few thou.

John
V-performance.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Deck Height for B20B [120-130]
posted by  J.J. subscriber  on Tue Jul 29 20:18 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.