Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Valve adjustment 700 1991

concluding that the IPD rental tool is more trouble than it's worth (am I interpreting that right?

The tool I used was not like the one from IPD. It was the type that levered under the cam against the edge of the follower. Sometimes the shim is difficult to remove from the follower; seems the oil between the shim and follower creates a suction. I don't know if the IPD tool is easier or not.

With the timing belt removed (remember I try to do my adjustments when I am changing the timing belt) it is rather simple to remove the cam. Although on the 7/900 series with the distributor on the cam you probably need to remove the cap and rotor to make it a bit easier.

Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Valve adjustment [700][1992]
posted by  oldyellr  on Mon Oct 6 07:49 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.