Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Valve adjustment 700

I have never seen a sequence for torqueing the nuts. I just get them all started on and then start from the center. I work my way out towards the ends much like head bolts would be torqued. Working with a rachet I give each nut a full revolution and then start back at the center repeating until they snug up. I then give them half of the final torque and finally torque them to specs.

The hushers simply push on the end of the stem. They are also called dampers.

Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Valve adjustment [700][1992]
posted by  oldyellr  on Mon Oct 6 07:49 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.