Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Clunk from rear 1986 244 200 1986

posted by  Dan Marino on  Mon May 3 13:21 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:46 CST 2014
[RELATED]

My torque rod bushings are history where the torque rod meets the axle.

I went ahead and ordered the IPD adjustable torque rods. The new rods come with poly bushings installed. I wanted to upgrade to poly and I figured this was easier than messing around with getting out the old rubber bushings and outer shells. Shipped to my house $177. The bushings alone were going to be $100. I'm spraying the bolts down with PBlaster as I wait for the shipment to arrive in the mail.

Best wishes.

13






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Clunk from rear 1986 244 [200][1986]
posted by  paul0075  on Sun May 2 15:02 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.