Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Step 2 - Troubleshooting Lack of Fuel Pump Operation 200 1993

uid 40935's pic
posted by  Goatman on  Mon Jan 10 00:23 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jul 26 20:30 CST 2014
[RELATED]

Fatcat,


I am glad you were able to check that the main relay is getting electricity. Now for the next step, making sure that the computer is calling for the pumps to turn on.

1. Reinstall the relay.

2. Clip the alligator lead to the red wire from the back of the relay connector.

3. Insert the probe into the blue-green wire terminal from the back of the relay connector.

4. Have an assistant turn the key to start.

5. Observe if the test lamp lights and post back.


Goatman






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED no start trouble shooting 240, AGAIN [200][1993]
posted by  1fatcat  on Sun Jan 9 10:46 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.