Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

High pressure regina fuel feed to metal line flare fitting stuck 900

posted by  Steve on  Sun Jan 23 19:08 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:16 CST 2014
[RELATED]

The plastic hose is, as I recall, a shrink fit on the 90 degree connector so you would have to slice it off. I would try to get an all new steel line: far easier than screwing around with a flaring tool under the car.
--
See the 700/900 "FAQ" at the menu bar top screen left side.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New High pressure regina fuel feed to metal line flare fitting stuck [900]
posted by  rsbrink  on Sun Jan 23 12:09 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.