Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2023 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

WIPER LINKAGE CREAKING & SQUAWKING 200 1981

posted by  stcroixbrian on  Mon Jul 25 19:53 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 24 10:09 CST 2011
[RELATED]

DO YOU KNOW WHAT THE BLACK RING (RUBBER OR PLASTIC)IS THAT IS JUST BENEATH THE SPLINED DRUM ? I HAVE SPRAYED PB-BLASTER,SILICON AND WD-40 BETWEEN THE DRUM AND THE BLACK RING, BUT THE RING SEEMS TOO TIGHTLY FIT TO ALLOW ANY LUBE TO GET IN. AFTER 3 DAYS STILL CREAKING AND BARELY MOVING W/O WIPER ARMS ATTACHED. CANNOT BE BUDGED AT ALL BY HAND W/ LINK DISCONNECTED FROM MOTOR ALTHOUGH THE MOTOR ITSELF HAS ENUF TORQUE TO EDGE IT ALONG STUBBORNLY. WONDERING IF IT IS A PLASTIC BUSHING THAT IS ON THE SHAFT INSIDE THERE ??

THANKS FOR THE INPUT,
BRIAN






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 WIPER LINKAGE CREAKING & SQUAWKING [200][1980]
posted by  stcroixbrian  on Sun Jul 24 09:22 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.