Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I need a creative solution 200 1989

posted by  dinomartino on  Fri Oct 21 16:47 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:43 CST 2014
[RELATED]

It is a one-piece bushing, no inner metal sleeve. Here's the little bastard in question:


it is 3/4" high, 3/4" diameter, and the groove around the middle is 1/16" deep.

This is my only spare, or I'd have offered to send you one.

EDIT: just saw Art's post below saying there IS a sleeve, and listing the part number. No sleeve inside this when I removed it from the AMM, and there's no sleeve inside the one on my car right now. The rubber is a loose fit on the bolt, so there's definitely room for such a sleeve, though I imagine it would make this little bugger harder to get out of the bracket.

John
--
1989 245 236K / 1993 945 127K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New I need a creative solution [200][1989]
posted by  B0RK ^3 subscriber  on Tue Oct 18 21:49 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.