Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

tone rings are intricate .... 200 1992

posted by  Ken C on  Mon Dec 19 19:15 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:39 CST 2014
[RELATED]

I'm not familiar with a flywheel tone-ring, but they typically have intricate teeth: e.g., have you looked at the ABS tone-rings on the hub of your front wheels? Sometimes (?) they also have a magnet embedded to establish the orientation of the crankshaft.

It's probable that the cost of a decent machinist customizing your flywheel to proper specs will far, far exceed the cost of purchasing the right flywheel.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M47 conversion, flywheel with no tone ring, is this required? [200][1992]
posted by  drj434343 subscriber  on Mon Dec 19 17:09 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.