Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M47 conversion, flywheel with no tone ring, is this required? 200 1992

posted by  jerryc on  Tue Dec 20 02:35 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 21:28 CST 2014
[RELATED]

THis pic shows what you need; I just read a thread on TB that went into this but I cannot find it now. You do have to line up the flexplate and the flywheel precisely so the orientation of the holes can be drilled exactly, with the blank space oriented right also, but it has been done successfully.


http://forums.turbobricks.com/showpost.php?p=3873991&postcount=462

There is an alternative;
Flywheel is the Quartermaster steel button that bolts on the back of the automatic flexplate, 7.25 twin rally disc.
http://forums.turbobricks.com/showpost.php?p=3830075&postcount=113

This guy can drill your flywheel for the lh2.4 holes
http://forums.turbobricks.com/member.php?u=6660






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M47 conversion, flywheel with no tone ring, is this required? [200][1992]
posted by  drj434343 subscriber  on Mon Dec 19 17:09 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.