Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

PV Heater Motor (Blower) 444-544

posted by  rayjanj on  Tue Nov 13 06:41 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 07:24 CST 2014
[RELATED]

Hello,

I installed a blower motor from a 1987 S10 in my 544 a fewm years ago.

Remove S10 squirrel cage. Drill out the 544 squirrel cage hole so it will fit onto the S10 motor shaft. I traced the 544 motor mounting plate onto a 1/8" piece of aluminum and cut and drilled it to fit. I wired it up for 2 speeds and mounted the S10 heater resistor inside the 544 housing so it is cooled by the air flow.

Ray J.

some pictures at: http://s1153.beta.photobucket.com/user/rayj5/library/#/user/rayj5/library/?&_suid=135281046713707297593761011375

1961 544
1987 S10 Chevy 4 cylinder
1990 Ford Ranger rear end
1988 Toyota Supra 5 speed
Volvo 240 front disc brakes






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED 1 PV Heater Motor (Blower) [444-544]
posted by  stigansven  on Mon Nov 12 14:48 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.