Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2006 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

PV Heater Motor (Blower) 444-544

Before you loosen one nut, try this.

Take a small Ball Peen hammer and "smack" the end of the shaft that is exposed on the top of the motor - use the "Ball" end of the hammer head. This will drive the shaft down slightly and perhaps provide clearance between the Squirrel Cage and the housing. I am presuming that you have already sprayed WD40 (or whatever) lubricant in the direction of the bearing surfaces.

Finesse and the right size hammer are the mechanics best friends.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED 1 PV Heater Motor (Blower) [444-544]
posted by  stigansven  on Mon Nov 12 14:48 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.