Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

repair an alloy rim w JB Weld or ? 200 1988

posted by  Onkel Udo II on  Tue May 7 01:58 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:50 CST 2014
[RELATED]

In Chicago alone I came up with three alloy wheel repair places without even trying so they do exist and are not uncommon.

If the rim is bent as you indicate, I would try repairing it myself.

I admit I would try JB weld if I had some surface pitting that was causing the bead not to seal.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New repair an alloy rim w JB Weld or ? [200][1988]
posted by  DogsRGood subscriber  on Tue May 7 01:48 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.