Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AW70 Shifter knob removal to replace plastic shifter cover 200 1992

Use a thin screwdriver to pry out the OD button. Then use the same screwdriver to pry out the top button; the shifter head is very rubbery and will be fine. Stuff the wires to the OD button back into the shifter head. Next, you simply have to jerk the shifter head straight up. It may be very stuck on, and you may end up slamming your knuckles into the roof, but that's how it comes off; its just a press-fit.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AW70 Shifter knob removal to replace plastic shifter cover [200][1992]
posted by  bluelacy  on Fri Aug 30 14:22 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.