Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AW70 Shifter knob removal to replace plastic shifter cover 200 1992

posted by  Paulii on  Sat Aug 31 07:19 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 6 03:04 CST 2014
[RELATED]

Hello, The shifter detent button needs to be removed first. The best way without breaking the plastic is to use a hair drier on high setting, give it plenty of time to heat up and the use two L shaped hooks to pull the button out. Once the button is off, remove the OD switch, the shifter should come right off, if it has been glued on, use a little Goof Off and a skewer to separate the shifter from the lever. Pauli






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AW70 Shifter knob removal to replace plastic shifter cover [200][1992]
posted by  bluelacy  on Fri Aug 30 14:22 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.