Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Order the correctly sized (16mm) bolt... 200

uid 27's pic
posted by  Art Benstein on  Thu Oct 2 16:21 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

I bought them from Tasca once. Believe the correct size is M12, but I received M10 bolts. My guess is Tasca combined common hardware, from among their many car marques into bulk stock and fill the blue bags as required from this, but perhaps a bin got mislabeled or mixed up.

Edit: Looking again at the partial part number on my bag, it didn't fit with the part number you suggested to google. The bag actually says 970966, and the fiche, from which I squinted out the p/n says 970986, so the parts Tasca sent me were correct -- for some other application. The Tasca invoices (ca 7/2011) don't show me part numbers, only descriptions and quantities. :) Sorry, Tasca, this is a typical error made by me.



Bought the 12mm bolts from McMaster-Carr.



Sawzall was the winning tool.




--
Art Benstein near Baltimore

I can't remember the last time I wasn't at least kind of tired.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear shock removal. [200]
posted by  Jac912  on Fri Sep 26 05:13 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.