Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<] [>>]

VIEW

REPLY TO THIS MESSAGE

SAVE

Placing a 1992 engine into a 1989 240. No start. 200 1989

posted by someone claiming to be Scotty on Wed Jun 1 09:16 CST 2016 [RELATED]

The 1992 engine came out of an LH 2.4 equipped car; the '89 is an LH 2.2 car if I am not mistaken.

I can't recall when Volvo started using a crank position sensor, but I believe it was in the very early 90s with the introduction of LH 2.4 Someone else can confirm that, but if I am right, then that is likely your issue here. Without an impulse from the crank position sensor, the ECU will not ground the fuel pump relay.

Do you have spark?

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

Placing a 1992 engine into a 1989 240. No start. [200][1989]
posted by Burco subscriber on Wed Jun 1 08:27 CST 2016 >

Placing a 1992 engine into a 1989 240. No start. [200][1989]
posted by someone claiming to be Scotty on Wed Jun 1 09:16 CST 2016 > V
- Placing a 1992 engine into a 1989 240. No start. [200][1989]
  posted by Burco subscriber on Wed Jun 1 17:40 CST 2016 > V
- Placing a 1992 engine into a 1989 240. No start. [200][1989]
  posted by Burco subscriber on Sun Jun 5 21:57 CST 2016 > V
- Placing a 1992 engine into a 1989 240. No start. [200][1989]
  posted by Burco subscriber on Sun Jun 12 05:19 CST 2016 > V

Placing a 1992 engine into a 1989 240. No start. [200][1989]
posted by machine man subscriber on Wed Jun 1 09:44 CST 2016 > V
- Placing a 1992 engine into a 1989 240. No start. [200][1989]
  posted by Burco subscriber on Wed Jun 1 17:45 CST 2016 > V
- Placing a 1992 engine into a 1989 240. No start. Got er going!!!! [200][1989]
  posted by Burco subscriber on Sun Jun 12 05:27 CST 2016 > V

Placing a 1992 engine into a 1989 240. No start. [200][1989]
posted by 1pocket on Wed Jun 1 12:02 CST 2016 > V
- Placing a 1992 engine into a 1989 240. No start. [200][1989]
  posted by Burco subscriber on Wed Jun 1 17:48 CST 2016 > V
- Placing a 1992 engine into a 1989 240. No start. It was the ECU.! [200][1989]
  posted by Burco subscriber on Sun Jun 12 05:34 CST 2016 > V

Placing a 1992 engine into a 1989 240. No start. [200][1989]
posted by Art Benstein subscriber on Wed Jun 1 12:47 CST 2016 > V
- Placing a 1992 engine into a 1989 240. No start. [200][1989]
  posted by 1pocket on Wed Jun 1 13:31 CST 2016 > V
- Placing a 1992 engine into a 1989 240. No start. [200][1989]
  posted by Burco subscriber on Wed Jun 1 17:50 CST 2016 > V
  - Placing a 1992 engine into a 1989 240. No start. [200][1989]
    posted by Art Benstein subscriber on Thu Jun 2 02:11 CST 2016 > V
    - Placing a 1992 engine into a 1989 240. No start. [200][1989]
      posted by Burco subscriber on Thu Jun 2 07:32 CST 2016 > V
    - Placing a 1992 engine into a 1989 240. No start. [200][1989]
      posted by Burco subscriber on Thu Jun 2 08:22 CST 2016 > V
      - Placing a 1992 engine into a 1989 240. No start. [200][1989]
        posted by 1pocket on Thu Jun 2 08:41 CST 2016 > V
        
        Placing a 1992 engine into a 1989 240. No start. Bad ECU [200][1989]
        posted by Burco subscriber on Sun Jun 12 05:43 CST 2016 > V
      - Checking injectors and fuel pressure [200][1989]
        posted by Art Benstein subscriber on Thu Jun 2 09:57 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Burco subscriber on Thu Jun 2 18:49 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Art Benstein subscriber on Sun Jun 5 07:13 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Burco subscriber on Sun Jun 5 21:53 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by machine man subscriber on Mon Jun 6 01:14 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Burco subscriber on Mon Jun 6 16:29 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by pageda on Mon Jun 6 04:02 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Art Benstein subscriber on Mon Jun 6 06:09 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Burco subscriber on Mon Jun 6 06:50 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by pageda on Mon Jun 6 06:55 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Art Benstein subscriber on Mon Jun 6 07:21 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Burco subscriber on Mon Jun 6 09:53 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Burco subscriber on Mon Jun 6 13:18 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Burco subscriber on Sun Jun 12 05:46 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Art Benstein subscriber on Mon Jun 6 06:20 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Burco subscriber on Mon Jun 6 09:38 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by boxvolvo on Mon Jun 6 13:33 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Burco subscriber on Mon Jun 6 17:34 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Burco subscriber on Sun Jun 12 05:48 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by machine man subscriber on Mon Jun 6 15:54 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by Burco subscriber on Sun Jun 12 05:58 CST 2016 > V
        
        Checking injectors and fuel pressure [200][1989]
        posted by machine man subscriber on Sun Jun 12 10:24 CST 2016 > V
    - Placing a 1992 engine into a 1989 240. No start. [200][1989]
      posted by Burco subscriber on Sun Jun 12 05:42 CST 2016 > V
- Placing a 1992 engine into a 1989 240. No start. It was the ECU. [200][1989]
  posted by Burco subscriber on Sun Jun 12 05:36 CST 2016 > V

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Volvo RWD/200 Forum Index

Community Forums:

RWD

AWD

GATHERINGS

OPINIONS

PICKNPULL

V8

STORIES

Classifieds

Site Features

RWD Series/Models

AWD Series/Models

Volvo RWD 200 Forum

Placing a 1992 engine into a 1989 240. No start. 200 1989