Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2001 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Here's the heat shield 120-130

posted by  uniberp on  Tue Jan 24 18:08 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jan 31 07:08 CST 2011
[RELATED]

Now that I made you look at my car...



I fabricated it from a piece of 16-18ga that had a sharp press bend in it. It's attached only at the 2 points, touching nowhere else, and the rear end is free, but it seems stiff enough and doesn't rattle. There's about .25 inch above and below, but I think it's enough to reduce direct radiant transfer to the alternator. A longer belt might increase that space.

-
--
MPergiel, Walker, MI






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 ALternator heat shield [120-130]
posted by  uniberp  on Mon Jan 23 11:13 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.