Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2013 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1993 940T Running rough intermittent 900 1993

posted by  spook on  Thu Jul 22 18:33 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:06 CST 2014
[RELATED]

Dear B.B.

Hope you're well and stay so. The ignition control module (ICM) - made by Bosch - has a black body and a flat gray cap. It is mounted on an aluminum base, secured by two screws to the upper portion of the inner fender wall.

The ICM is located just behind the headlight. On non-turbo models it is to the rear of the driver's side headlight. On turbo-equipped engines, the ICM is to the rear of the passenger-side headlight.

The heat sink paste should go between the ICM and the aluminum base.

Hope this helps.

Yours faithfully,

Spook






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1993 940T Running rough intermittent [900][1993]
posted by  B.B. subscriber  on Mon Jul 12 22:11 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.