Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2004

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Instrument panel lens cleaning

posted by  Five Bricks on  Wed Sep 15 02:21 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 22 15:09 CST 2007
[RELATED]

YES, it can be done! The clear cover and its frame are attached to the main body of the cluster by very small glue spots on a series of "fins" that run around the circumference of the cluster body. Take a flat screw driver or a butter knife (don't tell the wife)and GENTLY pry the cover frame away from cluster body. Break one "fin" loose at a time. Be very careful not to warp the the clear cover/frame assembly, or the clear plastic ma crack at a corner or one of the holes.

After getting the cover off and doing your repairs, you can reglue the fins with "krazy glue."

I'm two for two with this type of disassembly, but it's a bit nerve wracking. Be very careful not to damage the guage needles when the clear cover is off.

Good luck.
--
'88 244GL, '89 244GL, '90 244DL, '91 244, '92 244






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Instrument panel lens cleaning
posted by  Zee subscriber  on Tue Sep 14 21:29 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.