Volvo RWD S90-V90 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2011 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

POR-15 good stuff? S90-V90 1998

posted by  CW on  Mon Nov 7 18:32 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Feb 5 13:37 CST 2008
[RELATED]

Hi guys,

I noticed during the pre-purchase inspection of my V90 that it has some minor surface rust on the floor around a few spot-weld joints and on the engine k-frame. Nothing major, but I'm planning to eliminate it. I was going to grind or sandblast the spots, coat them with Metal Ready and then POR-15. It looks like the 'Super Starter Kit' is all I need. I've never used this stuff before, but I've heard it's good. I was just curious to know if it was the best stuff to put on polished (or close to polished as possible) surface rust areas. After the POR-15 dried, I would over coat with a good rubberized undercoating. I must say, Volvo really skimped on the undercoating on the V90s. My 745s have far better factory undercoating. I don't want ANY rust on my V90 for a long time, so I want to make sure it's repaired/protected properly.
--
Chris. Halifax N.S. '98 V90 > 195K km, '91 745T > 300K km (FOR SALE) and '91 745 NA > 409K km.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New POR-15 good stuff? [S90-V90][1998]
posted by  CW  on Mon Nov 7 18:32 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.