Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Does my balancer need replacing? 200 1991

posted by  vacuumhead on  Sat May 26 07:53 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 06:49 CST 2014
[RELATED]

Last week I checked the timing belt position. and found the cam sprocket would align with the balancer only when the timing mark was over an inch past TDC. I rechecked TDC on the #1 piston today and found the balancer would align with the piston 1/2inch past TDC. Does this indicate the balancer is slipping and needs replacing or can they be off mark this much?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Does my balancer need replacing? [200][1991]
posted by  vacuumhead  on Sat May 26 07:53 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.