Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Door Panel Removal: Removing the Omega clips 120-130 1966

Regarding my '66 122s 2 door.

I'm trying to take the door panel off of the passenger side door. There is a bunch of junk in the doors clocking up the drains. I can hear water (and other debris) sloshing about inside the door.

For what ever reason, the passenger door panel is providing to be more difficult to remove then the drivers side. I was able to get the driver side panel off with out too much trouble, but I did still struggle removing the Omega ("c") clips that hold the door and window handles in place.

I've got the IPD tool, but the instructions that came with it don't really make a whole lot of sense to me. I'm not really sure what the tool is suppose to really hook on to

Are there any tricks? I've tried searching the archives but I can't seem to find any useful info.

Thanks!
--
Formerly 'HearToTemptYou'






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Door Panel Removal: Removing the Omega clips [120-130][1966]
posted by  Dylan Berichon  on Sat Jan 12 01:17 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.