Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Hole Saws for TABs 200

posted by  David Samuels on  Wed Sep 9 13:18 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 20 12:23 CST 2014
[RELATED]

I've been using the hole saw method to remove TABs for a while and it's great. I've got a 2" saw on which I welded up the arbor fitting so it doesn't shake loose. Problem is that it's a bit too short. It's 1 7/8 deep, the deepest I've found without going to the big, industrial, 6" monsters (that cost $400). Has anyone found something deeper off-the-shelf? I've considered sectioning this one and making it deeper, but I thought someone might have come across one with
2 1/4" or 2 1/2" depth.
Thanks,
DS






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Hole Saws for TABs [200]
posted by  David Samuels subscriber  on Wed Sep 9 13:18 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.