Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

AMM / MAF 4v Burn-off Cleaning Cycle

posted by  DPDISXR4Ti on  Tue Apr 23 04:23 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I'm trying to use a Volvo/Bosch MAF in another application, and I'm trying to understand how the self-cleaning operation works, as I'm trying to re-produce the function in a manual fashion. I know that the PCM activates a 4v circuit for 1 second after shut-down. So here's my question... Must the 12v running voltage supply be shut off when this 4v burn-off cycle is activated? It would make life easier if I could have the meter powered with it's usual 12v while I activate the cleaning cycle, but if the 4v is getting switched into the same circuit normally "occupied" by 12v when running, that won't work.

Brad






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AMM / MAF 4v Burn-off Cleaning Cycle
posted by  DPDISXR4Ti  on Tue Apr 23 04:23 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.