Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ECU plug fix? 200

posted by  someone claiming to be Dean_85_240 on  Thu Mar 20 08:37 CST 2003 [RELATED]

I replaced the ECU connector 18 months ago by splicing on one I got from the junk yard. It worked until this week when the car suddenly began to die again. I've used those tiny inserts that Volvo sells, but they seem to make the problem worse - the plug is still loose. Also, electrical grease doesn't do the trick (tried that the first go around).

Rather than splicing on yet another connector, I'd rather find a permanent fix for this. I was thinking some liquid solder inside each of the female openings (insert Butthead laugh here) but I'm not sure if this is a good idea - is liquid solder electrically conducive?

If anyone has a better idea, please fill me in.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ECU plug fix? [200]
posted by  someone claiming to be Dean_85_240  on Thu Mar 20 08:37 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.